What to do if my RoboVac crosses the boundary strips?
Firstly, please confirm your RoboVac works with the boundary strips. Which RoboVacs work with boundary strips
If you confirm that your RoboVac works with the boundary strips, please check the below points:
1. Make sure the Robovac is not controlled by remote control manually at that time.
2. Turn off the main power switch on the side ("O" position) of the Robovac for 5 mins and then turn it on.
3. Use a dry cloth to clean the two hall sensors (below is the picture showing the location of the two hall sensors).
Please make sure you have used the supplied tape to lay the strips flatly on the floor, you may refer to the below link showing the instructions for using the boundary strips.
How to use the Boundary Strips to block off RoboVac?
If you have spare strips, please test the machine with the spare strips and see if it's because the used strips met demagnetization.
If you need further assistance, please email eufy support .
If you confirm that your RoboVac works with the boundary strips, please check the below points:
1. Make sure the Robovac is not controlled by remote control manually at that time.
2. Turn off the main power switch on the side ("O" position) of the Robovac for 5 mins and then turn it on.
3. Use a dry cloth to clean the two hall sensors (below is the picture showing the location of the two hall sensors).
Please make sure you have used the supplied tape to lay the strips flatly on the floor, you may refer to the below link showing the instructions for using the boundary strips.
How to use the Boundary Strips to block off RoboVac?
If you have spare strips, please test the machine with the spare strips and see if it's because the used strips met demagnetization.
If you need further assistance, please email eufy support .
What to do if my RoboVac crosses the boundary strips?
331 undefined
What if my RoboVac charges with a red indicator?
General troubleshooting when RoboVacs do not connect to WiFi
How to factory reset my RoboVac's WiFi?
What if my RoboVac beeps 4 or 5 times with a solid red light when on the charger?
What if My RoboVac Stops with Error S1? (for L70/G Series)
How do I connect my RoboVac to a new WiFi network after I set it up?
How to connect RoboVac to WiFi? (For Android)
What does the status light on RoboVac indicate?
What if my RoboVac runs with a loud noise?
How to Use eufy RoboVac’s Remote Control
eufy Clean L60 Hybrid دليل المستخدم (T2268)
eufy Clean L60 SES Benutzerhandbuch (T2277)
eufy Clean L60 Hybrid SES دليل المستخدم (T2278)
T2118, T2117, T2120，T2115 EUDOC
T2118, T2117, T2120，T2115 EUDOC
T2118, T2117, T2120，T2115 EUDOC
View More
RoboVac X8 Series: How to Replace the Wheels
RoboVac X8 Series: How to Replace the Wheels
How to Replace Bumper of RoboVacs
How to Replace Bumper of RoboVacs
How to Replace Bumper of RoboVacs
How to Replace Bumper of RoboVacs
View More
