Generally, you need to install and remove the mopping module when you choose only to vacuum or vacuum and mop at the same time. Kindly note that the mopping module is a black plastic plate behind the rolling brush and the mopping cloth is a piece of fuzzy cloth affixed to the bottom of the mopping module. Please refer to the images shown below. (Left: mopping module; Right: mopping cloths)

If you only want to vacuum the house, please press and hold on the left and right sides of the mopping module to remove it.

When vacuuming does not meet your needs, you can mop with your RoboVac RoboVac L35/LR30 Series. The mopping attachment can mop after vacuuming and vacuum and mop at the same time to ensure the best cleaning. To start mopping, fill the water in the water tank and put the mopping module and mopping cloth under the machine. Simply press the start button and it goes.

Please refer to the following video for detailed instructions:

Note:

When the mopping module is installed at the bottom of the RoboVac, the RoboVac's Auto-empty function will not work. In order to ensure that the Auto-empty function will work when the RoboVac returns to the Auto-Empty Station, please make sure the mopping module is not installed on the RoboVac. Also, it would be difficult for you to remove the brush guard to clean the rolling brush and remove the dust collector if the mopping module is installed on the RoboVac.