Notice :

1. If you have set the time before, please turn off the side main switch first to clear the original setting. After programming, please do not turn off the side main switch, otherwise both the time setting and the schedule setting will be cleared.

2. Long press the bell button for 3s (RoboVac beeps twice and the bell icon disappears) cancels a previously set scheduled cleaning.

3. Please point the remote directly at the RoboVac within 3 meters.

Step 1: Make sure the side main switch is turned on and the RoboVac is charged.

Step 2: Set the time:

1. Press the clock button on the remote to set the time. It should be the actual / current time, for example, it’s 12:30AM, then set the time to be 12:30AM.

2. The time showing on the screen will blink and you can adjust the time by pressing the

up/down and left/right button. Please make sure the AM/PM is correct.

3. After setting the time, press the round button in the middle to save the setting. You will hear one beep indicating the time is set.

Step 3: Set the schedule:

1. Press the bell button to set the schedule, which is when you want the RoboVac to run.

2. Arrow buttons to adjust.

3. Press the round button in the middle to save the schedule setting. You will hear one beep

indicating the schedule is set.