Q: How long does it take RoboVac to charge from 0-100%?
A: About 5-6 hours.
Q: What does the status light on the charging base indicate?
A: When the charging base connects to AC power, the LED indicator on the charging base is solid white.
Q: How to charge my RoboVac when used for the first time?
1. Attach RoboVac to the Charging Base by aligning its charging pins with the charging pins on the base;
2. Fully connect the charging cable and the charging base to make sure the LED indicator on the charging base is solid white;
3. Make sure the breathing orange indicator on RoboVac lights up when you charge it, and then fully charge it until the indicator turns into solid blue.
Q: Can I leave the RoboVac on the charging base after it's fully charged?
A: You can put the RoboVac on the charging base though it's fully charged. The battery protection circuit prevents the battery from being overcharged. Once the RoboVac is fully charged, it will stop drawing power. In this way, the vacuum can be always ready to go and cleans on schedule every day.
If you are leaving for a long time, like one week, it's recommended to unplug the adapter and the charging base, and turn off the main power switch of your RoboVac for safety.
If your RoboVac cannot be charged properly, please refer to the following FAQs:
What if RoboVac can't be charged at all (no beep when placing it onto the base)?
What if my RoboVac charges with a red indicator?
What if my RoboVac beeps 5 times with solid red light when on the charger?
Basic Inquiries about X8/X8 Hybrid
Charging-related support article for RoboVac LR30/LR20/L35 series
If you need further assistance, please email eufy support.
