The RoboVac L50 SES, LR30 Hybrid+, L35 Hybrid+, G35+, G40+, and G40 Hybrid+ support the auto-empty feature. They charge with an auto-empty station. The L50, L60, LR20, LR30 Hybrid, and L35 Hybrid do not support the auto-empty feature. They charge with a charging base.

For High Voltage Countries(UK/ Germany/Australia,,etc): 220V-240V~50/60Hz

For Low Voltage Countries(USA/Japan/Canada,etc): 100V-120V~50/60Hz

Preparations before charging:

Firstly, install the Charging Base/Auto Empty Station in a location that RoboVac can easily access. It is recommended to place the Charging Base/Auto Empty Station against a wall, and on a hard-level surface(rather than on rugs or carpets).

Then, remove the objects within 1.6ft/0.5m (for G+ series: 1m/3.3ft) of the left and right side and within 4.9ft/1.5m (for G+ models: 2m/6.6ft) of the front of the Charging Base/Auto Empty Station. If you cannot remove the objects, please move the RoboVac and its Charging Base/Auto Empty Station to another location with a wide and open space. The distance and environment needed are to make sure the RoboVac is able to successfully return to the Charging Base/Auto Empty Station after it finishes cleaning. It is important to always keep the Charging Base/Auto Empty Station plugged into a wall outlet and powered on, otherwise, your RoboVac will fail to automatically return to its Charging Base/Auto Empty Station.

Charging and related indicator status:

Connect the adapter to the Charging Base/Auto Empty Station and a wall outlet.

For the L50, L60, LR20, LR30 Hybrid, and L35 Hybrid, when the Charging Base connects to the AC power, the LED indicator on the Charging Base will display a solid white light. For the LR30 Hybrid+ and L35 Hybrid+, when the Auto Empty Station connects to the AC adapter, the LED indicator on the Auto Empty Station will display a solid blue light. For the L60 Hybrid SES, L60 Hybrid, L60 SES, L50 SES, G35+, G40+, and G40 Hybrid+, the LED indicator on the Auto Empty Station will display a solid white light.

For RoboVac LR20/LR30/L35 series, when the LED indicator on the top panel of the RoboVac displays a pulsing blue light, it indicates that the RoboVac is charging. For the RoboVac G+ series, when the LED indicator on the top panel of the RoboVac displays a pulsing orange light, it indicates that the RoboVac is charging. When the LED indicator on the top panel of these RoboVacs displays a solid blue light, it indicates that the RoboVac is either fully charged/standby or clean.

For the RoboVac L60 series and L50 series, when the LED indicator on the top panel of the RoboVac displays a pulsing white light, it indicates that the RoboVac is charging. When the LED indicator on the top panel of these RoboVacs displays a solid white light, it indicates that the RoboVac is either fully charged/standby or clean.

If you need any further assistance, please contact us.