Below is a how-to video for your intuitive reference.

Firstly, start with Quick Mapping to create a complete and initial map.

-If the initial map is unsatisfactory, you can edit the rooms. (Merge adjacent rooms into one./Divide a room into two./Name a room.)

-When a complete map of the house has been created, you can choose a Room or Zone to clean. (Choose a room or rooms to clean / Add a zone or zones to clean.)

Additionally, you can also adjust the cleaning modes.

-If you adjust the settings for the General mode, the robot vacuum will execute all of the cleaning tasks in this setting.
-If you have different cleaning needs for different rooms, simply choose "Customize" to customize the mode for each room. (reminder: This mode is not ready yet but it will be available soon).

-In Auto/Room mode, rooms will be cleaned according to their customized mode.

-Press "Edit" to customize the mode for each room, then click Save in the upper right corner.

-You can set Virtual Boundaries/No-Go Zones/No-Mop Zones if you don't want the robot vacuum to clean or mop certain areas. 

-Turn on Multi-Map Saving if you're using the robot vacuum on different floors so that it can save multiple maps (up to 5 maps). 
-You can set a cleaning schedule so that the robot vacuum can start cleaning at the scheduled times.
-If you have a large floor area and the robot vacuum cannot finish all rooms in one cleaning cycle, please turn on Auto-Return Cleaning, so that the robot vacuum can resume cleaning after charging.

-If you have carpets, you can customize Carpet Cleaning Settings. 

-Go to "Base Station Settings" to select the Mop Washing Frequency and Auto Drying times that suit your cleaning needs. 
-If you want to lock the robot vacuum's touch buttons to keep children and pets from accidentally triggering the vacuum, simply enable the Child Lock feature. You can also set the Do Not Disturb period and Voice Settings.

If you have any further questions or concerns, please don't hesitate to contact us for assistance.