Here is a quick start guide to help you set up the eufy Petcare water fountain.
Getting Started
1. Place the sterilization filter in the filter cover and press down on it until it sits at the bottom of the base. Place the filter in the purification filter cover.
2. Align the filter cover with the groove under the drinking tray and turn it counter-clockwise until it locks in place.
3. Insert the head of the water pipe into the side outlet of the drinking tray. Make sure the water pipe is inserted correctly.
4. Pour water into the main body. Make sure the water level is between the “Min” and “Max” water lines that are marked on the inside.
5. Align the drinking tray with the main body as illustrated until it clicks into place.
6. Attach the transparent cover onto the main body by pressing down on it and turn it clockwise until it locks in place.
Using the Petcare Water Fountain
1. Connect your Petcare water fountain to a power outlet by using the provided USB charging cable and adapter (5V/1A).
2. After it is powered on, the Petcare water fountain will start dispensing water continuously .
Note: When water level drops below the “Min” water line, the pump will stop working. It will resume normal operation after water is refilled.
Maintenance
For optimal performance, follow the instructions below to clean and maintain your Petcare water fountain regularly. The frequency to clean the water fountain or replace the filters will depend on your usage habits.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If you have any questions, please contact us for further assistance.
