eufy Clean app is a powerful tool to control your RoboVac to free your hands. Here is the eufy Clean app function guidance for X8/X8 Hybrid. 

 

Note: some features mentioned in this article might be not suitable for other models.

 

On the control page, you can see the RoboVac status including 

RoboVac name

Real-time cleaning time

Real-time cleaning area

Battery status

Real-time cleaning map

Sub-room map

To Edit Map, you can: 

 

Reset Map:

Resetting the map will clear the cleaning map

 

Manage Map:

You can save up to 5 maps, so X8/X8 Hybrid is suitable for big houses with multi-floors.
You can save up to 5 maps, so X8/X8 Hybrid is suitable for big houses with multi-floors.  Do the RoboVac X8 Series Support Multi Floors? Can I Save Multiple Maps on them?

 

Edit Room

You can Merge Rooms, Divide Rooms, Name the room. 

 

No-Go Zone

By setting up No-go Zone/Virtual boundary, you can block the RoboVac from vacuuming some areas that you don’t want it to. 

On the control page, you can also 

Switch Cleaning Modes (Auto Clean, Room Clean, Spot Clean, Zone Clean)

Switch suction power level (Pure, Power, Turbo, MAX, BoostIQ)

Start and stop the vacuum, and send the vacuum to the charging base by pressing “Recharge”. 

 

On the Settings page, you can see Device Info (Name/Connected WiFi/MAC address). You can also do the following:

Manage Map

Schedule

Set up a schedule, then the RoboVac will automatically clean the whole house at the scheduled time.

Tap N Go

Set the target point on the map through the app and RoboVac will automatically plan a route to the designated target point. 

Manual control

Control the RoboVac by pushing buttons, which include "forward", "counterclockwise rotation" and "clockwise rotation".

Cleaning History

You can see the cleaning record here, which contains information: cleaning start time, cleaning area, cleaning time spent, cleaning map, cleaning path

Device Sharing

How to share RoboVac access with my family?

Auto-Return Clean

When the battery level is too low to continue cleaning, RoboVac will automatically return to the charging base. Once charged to 80% battery it will resume cleaning in the area at which it stopped.

Do Not Disturb 

RoboVac will not start auto-return cleaning and the voice prompts are deactivated when RoboVac is in "Do Not Disturb" mode.

Voice Settings

You can set the RoboVac volume and select the correct voice pack according to their personal usage habits.

Unit Setting

Users can set the units of the RoboVac cleaning area.

Find My Robot

If the user can't find his RoboVac, he can use this function to find his RoboVacs

Firmware Update

How to update RoboVac's firmware?

Activity Log Upload

What's the "Log Upload" feature in the eufy Clean App?

Remove Device

Remove current RoboVac from your eufy Clean account.