Background
It is important to note that the S1 Pro may not always successfully recognize furniture with black or metal legs during its cleaning session due to the color and material of the furniture, resulting in the S1 Pro accidentally running into the furniture and causing damage to the furniture or the robot itself.
If you have either black or metal furniture at home, please try the recommended suggestion below to prevent the S1 Pro from accidentally running into your furniture.
- To improve the robot's ability to recognize furniture with black or metal legs, it is recommended to affix reflective stickers to the furniture legs:
- For furniture with black legs: Use black reflective stickers.
- For furniture with metal legs: Use white or metallic reflective stickers.
Please refer to the images below for the recommended positioning of the reflective stickers. Please note that you do not need to cover the furniture legs completely, but only mark the areas where the robot usually runs into the furniture while cleaning. Reflective stickers can be affixed to the furniture legs in the same direction, with a gap of 15-20 cm between two stickers; additionally, please note that the width of the reflective stickers is recommended to be longer than 2 cm.
How to Affix Reflective Stickers
Before affixing reflective stickers, please refer to the following steps:
- Identify areas where the robot usually collides with the furniture.
- Affix reflective stickers to the furniture according to the images above.
- Leave a gap of 15-20 cm between two stickers.
Where to Purchase Reflective Stickers
The recommended reflective stickers can be purchased through the following channels:
- Search for reflective stickers online.
- Contact us for further recommendation.
Conclusion
eufy lab test results have proven that after affixing reflective stickers to furniture with black or metal legs, the S1 Pro can significantly improve its ability to recognize furniture with black or metal legs. At the same time, this method can also prevent the S1 Pro from potentially damaging the furniture legs or the robot itself.
Using reflective stickers to identify furniture legs is a simple yet effective method. Not only does this method prevent the possibility of the S1 Pro from running into your furniture during its cleaning session, but it also increases the robot's cleaning efficiency to ensure it can deliver spotless cleaning results!
If you have any further questions regarding the S1 Pro, please don't hesitate to contact us for assistance.
