Before starting the setup process, please ensure the following:
- Your iPhone is connected to a 2.4GHz WiFi network and you know the WiFi password.
- Ensure that you have already enabled the location service for the EufyLife app. On your iPhone, go to Settings -> Privacy -> Location Services -> EufyLife -> While Using the App. And enable Precise Locations.
- For scales that have not been connected via Bluetooth, please connect to Bluetooth first.
- For scales that have been connected via Bluetooth, you can click the corresponding scale on the Me page to open the Settings page. Go to Settings and click "Connect to Wi-Fi".
3. Choose your home's 2.4GHz WiFi network, enter the WiFi password, and click "Next". If no WiFi network is available, please refresh the list.
- Do not disconnect your phone's Bluetooth while connecting. A flashing WiFi light means the scale is connecting.
- After the connection is successful, click "Start" to check your data.
Kind reminder, please turn off the Bluetooth on your phone when you step on the scale to weigh, otherwise, the scale will first synchronize data via Bluetooth connection. When you weigh on the scale, the scale will first show your weight data, body fat date, and then your heart rate data (only for P2 pro)after the“□” symbol goes clockwise around the display screen and shows 12 times. First, it will show the Bluetooth icon, then the heart rate icon(only for P2 pro), and when all the measurements are completed, it will then show the solid WIFI Icon finally, which means the data is synchronized to the APP successfully. The Wi-Fi icon will only display during the measurement sequence rather than at first and will be steady only briefly when measurement data is transmitted to the Wi-Fi network.
You can refer to the video instructions:
https://support.eufylife.com/s/article/eufy-Smart-Scale-P2-Series-How-to-Connect-iOS-Devices
If you have any further questions regarding the EufyLife app, please contact us.
