How to use the Boundary Strips to block off RoboVac?
For RoboVacs that work with boundary strips (Which RoboVacs work with boundary strips ), you can apply the boundary strips on flat surfaces to block off your RoboVac.
The boundary strips need to be taped down. They come with double-sided tapes.
Below are recommended steps:
1. Measure the length of the strip you might need.
2. Cut the boundary strip vertically.
3. Stick the 3M adhesive tape on the boundary strip.
4. Apply the strip on the hard and flat floor. The side with the "eufy" logo should face upward.
The boundary strips need to be taped down. They come with double-sided tapes.
Below are recommended steps:
1. Measure the length of the strip you might need.
2. Cut the boundary strip vertically.
3. Stick the 3M adhesive tape on the boundary strip.
4. Apply the strip on the hard and flat floor. The side with the "eufy" logo should face upward.
264 undefined
What if my RoboVac charges with a red indicator?
General troubleshooting when RoboVacs do not connect to WiFi
How to factory reset my RoboVac's WiFi?
What if my RoboVac beeps 4 or 5 times with a solid red light when on the charger?
What if My RoboVac Stops with Error S1? (for L70/G Series)
How do I connect my RoboVac to a new WiFi network after I set it up?
How to connect RoboVac to WiFi? (For Android)
What does the status light on RoboVac indicate?
What if my RoboVac runs with a loud noise?
eufy Warranty Policy
RoboVac 30C_Manual_EN
RoboVac LR30 Hybrid_EN/DE/ES/FR/IT/TR/RU/NL_Manual
RoboVac LR20_EN/ES/FR_Manual
RoboVac G32 Pro_Manual_EN+ES
RoboVac L35 Hybrid_EN/ES_Manual
RoboVac G32 Pro_Quick Start Guide_EN+ES
View More
How to Replace Bumper of RoboVacs
How to Replace Bumper of RoboVacs
How to Replace Bumper of RoboVacs
How to Replace Bumper of RoboVacs
How to Replace Bumper of RoboVacs
How to Replace Bumper of RoboVacs
View More
