Assembly: 

Insert the handle into the host, and make sure you hear a "clicking" sound to verify the handle is installed successfully.

Charging: 

Place the vacuum on the charging base. Please make sure the vacuum is correctly positioned on the charging base. The adapter is connected to the power supply, and the smart LED screen lights up to indicate that the vacuum is being charged. Please note it is recommended to charge the vacuum for more than five hours before using it for the first time.

Using the Vaccum: 

Before starting the vacuum, please remove the clean water tank and fill the water tank with water. You can add detergent as needed, but do not exceed the maximum mark.

Cleaning: 

Gently depress the foot pedal and pull the handle back until you hear a clicking sound. Press the On/Off button to start cleaning.

Self-cleaning: 

After the cleaning work is finished, please place the vacuum back on the charging base to start self-cleaning. Press the self-cleaning button according to the prompt tone, and the vacuum will start self-cleaning and self-drying. After the self-cleaning process is completed, please clean the dirty water tank as soon as possible to avoid a musty smell.

Storage: 

Our products are equipped with removable storage and charging bases, so you do not need to damage your wall by drilling holes. Simply place the vacuum on the charging base and place it in a cool, dry location when the vacuum is not being used.

If you need further assistance, please contact eufy support.