Details
Related Articles
Manuals & Downloads
Support Videos
What should I do if my S1 Pro leaks debris during the dust collection process?
 

When the S1 Pro is docked on the base station for dust collection, it should seamlessly transfer the debris from its dustbin into the dust bag. However, if you notice that debris is not being sucked into the dust bag and is rather leaking from the robot's brush outlet, please refer to the following troubleshooting steps to resolve the issue.

 

The most common cause for this malfunction is a blockage where the dustbin outlet on the robot has misaligned with the dust entrance on the base station. If you observe and notice any dirt, debris, or buildup on the pins, gently wipe them clean with a soft, dry cloth. Do not use water or cleaning solutions, as this could cause damage to the electrical components.

 

Another potential cause could be hair clogging the dustbin, especially if you have pets at home. Please note that excessive pet hair can clog the dustbin, making it difficult for the robot to function normally during the dust collection process. Therefore, it is recommended to adjust the dust collection frequency settings. For homes with pets, it is recommended to set the robot to perform the dust collection process after cleaning an area of 30 or 40 square meters.

 

Please note that regular maintenance and cleaning of the robot's components are essential to ensuring its optimal cleaning performance and longevity.


If you have any further questions regarding the S1 Pro, please don't hesitate to contact us for assistance.
What should I do if my S1 Pro leaks debris during the dust collection process?
Download
Applicable for those products :
Resolved
Unresolved
Copied
76 Results
Mapping Instructions and Tips for the S1 Pro
2288 views/1 likes/2025-04-08 16:30:17
Can't find devices?
3314 views/2 likes/2025-06-04 14:38:57
eufy App Beta Test Install & Rollback & Feedback FAQ
886 views/1 likes/2025-06-04 14:36:35
How do I use eufy cleaning solution with my S1 Pro?
1401 views/2 likes/2025-04-08 16:30:27
What should I do if my S1 Pro triggers error code EB14?
1293 views/1 likes/2025-04-08 16:30:27
View More
Manuals & Downloads
‬⁡‌​⁢‬⁣‬‌⁢⁣‌⁣⁢⁢​⁤​⁣‬‬​‌​​⁣‌⁡‍‬​‬‍⁢⁤‍⁣​‍‌​‬⁢【T8010】【HomeBase 2】EU Declaration
Download
T8113S_EU Declaration of Conformity
Download
eufyCam_2C_Pro_Set_Manual_us
Download
RoboVac 30C_Manual_EN
Download
video_Doorbell_2K_(Wired)_Manual_us
Download
Motion_Sensor_manual_us
Download
RoboVac 35C/25C_Manual_EN
Download
720p_Video_Baby_Monitor_manual_us
Download
HomeVac S11 Go/Reach/Infinity_EN+ES_Manual
Download
eufyCam_2_Pro_Set_Manual_us
Download
Support Videos
How to Connect RoboVac to iOS Devices
eufy 3-in-1 E20: Unboxing and Quick Start Guide Video
How to Install eufy Security Video Doorbell (Wired)
How to set up eufy Security Video Doorbell (Battery-Powered)
How to Install eufy Security Floodlight Camera
eufy Security App Functions
RoboVac X8 Series:How to Connect iOS Devices
eufy 3-in-1 E20: How to Connect to Wi-Fi (iOS/Android)
eufy 3-in-1 E20: How to Control Your Device via the eufy Clean App
eufy Clean WetVac W31: Unboxing Video