What should I do if my S1 Pro's suction becomes weak?
Please refer to the following common causes and solutions if your S1 Pro's suction power has diminished.
The robot's dust inlet may be blocked.
Cause: The side brush, roller brush, dustbin, and high-performance filter inside the dustbin may have residual debris blocking the dust inlet.
Solution: Carefully clean the residual debris from the side brush, roller brush, dustbin, and high-performance filter inside the dustbin.
The brush guard strip or filter in the dustbin may be damaged.
Cause: The brush guard strip may be either damaged or missing, or the foam seal at the dustbin outlet may be damaged.
Solution: Check if the brush guard strip is intact; if it is damaged or missing, please replace it as soon as possible. Also, please inspect the dustbin outlet's foam seal to ensure it is not damaged.
If you have any further questions regarding the S1 Pro, please don't hesitate to contactus for assistance.
