Yes! The X10 Pro Omni is equipped with an onboard water tank that holds up to 80ml, ensuring that it can start its cleaning cycle without the immediate need for the Omni Station to wet the mopping pads. Additionally, the X10 Pro Omni's all-in-one Omni Station is equipped with a substantial 3-liter clean water tank.
When the clean water tank in the Omni Station is filled to the MAX water level, the X10 Pro Omni is capable of thoroughly cleaning areas between 1,500 to 2,000 square feet up to three times, making it an ideal solution for larger homes and spaces. The X10 Pro Omni's intelligent system ensures that you do not have to worry about constant refills, allowing for an uninterrupted cleaning experience.
An important aspect of the X10 Pro Omni's Mopping function is the mop washing frequency setting. This setting determines how often the robotic vacuum cleaner will rinse and clean the mopping pads, which directly affects the total water consumption from the clean water tank.
You can also pre-set how often the robotic vacuum cleaner automatically returns to the Omni Station and washes the mopping pads during each cleaning cycle.
By Room: Based on the division of rooms on the map, the robotic vacuum cleaner will automatically wash the mopping pads before mopping the next room.
By Duration (min): The robotic vacuum cleaner will automatically return to the Omni Station and wash the mopping pads according to the pre-set time between 15 to 25 minutes.
However, it should be noted that increasing the mop washing frequency will lead to a decrease in the overall area cleaned per water refill. This is due to the robotic vacuum cleaner needing to consume more water to frequently wash the mopping pads, thereby depleting the water tank more rapidly.
This feature is particularly beneficial when the robotic vacuum cleaner is set to use high water volume to mop the floors, as it ensures that the mopping pads remain consistently damp, thereby achieving exceptional cleaning results. To maintain this level of efficiency, it is recommended to have the robotic vacuum cleaner return to the Omni Station to wash the mopping pads according to the following water consumption:
- High Water Volume Mode: Every 15 minutes
- Medium Water Volume Mode: Every 20 minutes
- Low Water Volume Mode: Every 25 minutes
Additionally, please make sure to monitor the water level in the clean water tank and refill it as needed, depending on the size of your home and the frequency of cleaning sessions. When the robotic vacuum cleaner finishes cleaning, it will return to the Omni Station to auto-clean and auto-dry the mopping pads. The mopping pads are thoroughly washed and then dried using 40°C hot air to prevent the build-up of bacteria; therefore, the mopping pads are always ready when the robotic vacuum cleaner starts a new cleaning cycle. With the X10 Pro Omni, you can enjoy sparkling clean floors with the convenience of modern technology!
If you have any further questions or concerns, please don't hesitate to contact us for assistance.
