How do I configure the alarm light on my PoE camera?
Please follow the steps listed below to configure the alarm light on your PoE camera:
-
Launch the eufy app > tap the NVR central hub > tap the gear icon > choose the camera group connected to the NVR central hub.
-
Tap “Light Setting” and choose “Light alarm.”
-
Choose “Red and Blue Alarm Light.”
-
Proceed to the “Smart” tab > select the Security mode you want to use, such as “Home” or “Away” > enable the “Light Alarm” feature.
-
You can create an activity zone based on your preference, then trigger the camera in “Motion Test Mode” and check if it emits a red and blue light.
If you have any other questions about the PoE NVR Security System, please don't hesitate to contact us for further assistance.
38 undefined
Can the PoE NVR Security System connect to cameras wirelessly?
What connection methods can be used to set up the PoE NVR Security System?
How do I replace the hard drive in the NVR central hub?
How do I connect PoE cameras to the NVR central hub through a PoE switch?
How do I set up my PoE NVR Security System?
How do I update the firmware on my PoE NVR Security System?
Does the PoE NVR Security System work with HomeBase 2 and HomeBase 3?
What type of network cable is included with the PoE NVR Security System?
Can I use the eufy app on my MacBook?
How do I enable the Mirror View or Rotate Image 180 feature on my PoE camera?
Australia & New Zealand Warranty for eufy PoE NVR Products
NVR Security System User Guide (E8P10)
NVR USB Flash Driver Update User Manual
NVR Security System Käyttöopas (E8P10)
NVR Security System Användarhandledning (E8P10)
NVR Security System Brugervejledning (E8P10)
View More
Setting up and Installing
Setting Up and Installing
Network Video Recorder S4 - Setting Up and Installing
PoE Cam S4 - Setting up and Installing
