Before using the E20 robot vacuum for the first time, please follow the steps below to set up your robot for optimal cleaning efficiency:
-
Remove the protective film from the robot's front and side lenses.
-
Before using the robot for the first time, it must be activated by charging it at its base station.
-
The base station should be set up using the included dock assist mat on its underside. Furthermore, please remove any obstacles within 1.6ft/0.5m on both the left and right sides of the station and 4.9ft/1.5m in front of it.
-
As the robot can only detect objects that are at least 15mm tall, please remove small items like wires, toys, socks, and clothing from the floor to avoid them getting caught in the robot's roller brush.
-
After creating a complete cleaning map, be sure to designate the carpet areas with the "Carpet Editing" feature. For thin carpets or small rugs, we recommend storing them away or securing them to the floor using 3M tape.
-
If you have multiple pets at home or have a household with heavy foot traffic, it is important to increase the frequency of dust collection to clear dirt and debris from the roller brush. We recommend setting the dust collection frequency to every 15 minutes in the app to maintain the robot's best performance. Furthermore, you can activate the "Deep Dust Collection" feature to improve the robot's cleaning efficiency.
-
Please refrain from operating the robot on water since it is not waterproof.
If you have any other questions regarding the E20 robot vacuum, please don't hesitate to contact us for further assistance.
