This article outlines common causes and solutions for radar sensors that are failing to bind as expected.
Installation Precautions
-
To ensure a successful binding process, it is recommended to bind the radar and light strip before physically installing them.
-
If the radar is installed too far from the control box, binding may fail due to communication issues.
Why Can’t My Radar Complete Binding?
-
Network Connection Issues
A poor network connection can interfere with the binding process. Additionally, if your network is using Wi-Fi 7, compatibility issues may occur that prevent successful radar binding.
-
Radar Placement
Ensure the radar is placed as close as possible to the control box of the light strip. If the distance is too great, the radar may not receive the signal required to complete the pairing process.
For best results, perform the binding process before installation and ensure a stable Wi-Fi connection during setup.
If you have any other questions regarding the Permanent Outdoor Lights S4, please don't hesitate to contact us for assistance.
