A damp mop can be a breeding ground for bacteria, which can cause unpleasant odors in your home. After using the Mopping function, it is extremely important to dry the mops properly.
The X10 Pro Omni cleans and dries the mops after it finishes a cleaning cycle and docks itself on the Omni Station. The drying time can be configured in the eufy Clean app, and there are currently three settings: 2, 3, or 4 hours. Please note that the default drying time is set to 3 hours.
Please launch the eufy Clean app and click Settings > Base Station Settings > Drying Duration, and then select a drying time of your choice.
The time it takes for the mops to be completely dried varies depending on environmental factors such as the humidity and temperature of the room and the moisture content of the mops. Therefore, it is highly recommended to adjust the drying time in the eufy Clean app according to the weather.
Additionally, you can manually dry the mops via the eufy Clean app if necessary. Please note that this function is available only when the X10 Pro Omni is placed on the Omni Station.
You will hear a slight running sound while the Omni Station is drying the mops. The main source of noise is the hot air being blown by the DC fan inside the Omni Station. The low noise level also makes it possible to dry the mops at night without causing any disturbances.
The power consumption of the X10 Pro Omni is also relatively minimal, and the maximum power consumption at any given time is less than 0.4kWh (2H drying less than 0.2Wh, 3H drying less than 0.3kWh, and 4H drying less than 0.4kWh). This means that the drying process is energy-efficient and it will not significantly increase your electricity bill. Additionally, the eufy Clean app will display the icon shown in the following image:
The drying mode will stop after the duration of the mode you selected has elapsed. If you wish to stop immediately, please follow the steps below: through the base station icon on the app's homepage, select the drying function - then select stop.
If you have any further questions, please don't hesitate to contact us for assistance.
