Usage Tips

1. Improve Edge Cutting

· Safe Distance: Avoid edges with obstacles, ditches, or cliffs. Ride-On-Edge is not suitable for these areas, so manual trimming is required.

· Adjust Ride-On-Edge Spacing for closer cutting.

· Wall-Edge Trimming: Grass within 10 cm (4 in) of walls may need manual trimming.

2. Optimize Mowing Performance

· Boundary Setup: Use physical barriers or set virtual walls after mapping for unclear boundaries with neighbors.

· Mowing Zones: Manually set mowing zones for full coverage, especially for yellowed or patchy lawns or around manhole covers.

· Cutting Height: For tall grass, lower the blade height gradually.

· Multi-Zone Pathway: Set up if the distance between lawn areas is ≤60 m (65.62 yd).

· No-Go Zones: Mark areas where the mower may get stuck.

3. Battery Usage & Maintenance

· Coverage per Charge: Approx. 150–190 m² (0.037–0.047 ac). Actual coverage may vary based on mowing settings and environmental conditions.

· Resume Mowing: Automatically resumes unfinished tasks after charging.

· Base Station Placement: Keep the charging cable 30 cm (12 in) above ground to prevent water damage.

· Software Updates: Update firmware regularly.

4. Safety Tips

· The robot mower camera has a 96° horizontal FOV and 80° vertical FOV. For safety, avoid standing in blind spots at the sides or behind the mower during operation.